Storage dimensions and sources for small-space equipmentEquipment sizes & sources

Will it fit? Try the Fit Finder

COMPARISON

Plate and bar stands for a small gym

For the smallest empty footprint, the Marcy PT-5856 needs 23.75 × 23.5 inches of floor space and stands 53 inches tall. Measure again with your plates and longest bar in place. Marcy PT-5856 assembled measurements

For a lower stand, the fixed-foot LIONSCOOL is 31 inches high on a 31.1 × 26.4-inch base. Leave space above it to lift a bar out of its socket. LIONSCOOL dimensions by foot or wheel configuration (paid link)

The XMARK XM-9055 for iron plates needs 29 × 23.75 inches of floor space and stands 57 inches high when empty. XMARK rack and plate specifications

By Sources checked

EDITOR’S PICKS

Our top picks

Compare the size, setup, and limitations of each pick. Follow “Specs & sources” for the measurements behind it.

As an Amazon Associate I earn from qualifying purchases. It doesn’t change our picks or your price. Affiliate disclosure

  1. 1Amazon (paid link)

    #1Smallest base

    Illustration

    Empty stand

    23.75 × 23.5 × 53 in

    Assembled, empty stand

    Marcy

    Olympic Plate Tree PT-5856

    Six pegs · wheeled

    The empty base measures 23.75 × 23.5 in. Two sockets hold Olympic bars upright, so check the ceiling at the storage spot.

  2. 2Amazon (paid link)

    #2Rolling iron-plate storage

    Illustration

    Empty stand

    29 × 23.75 × 57 in

    Assembled, empty stand

    XMARK

    Commercial Olympic Plate Tree

    XM-9055 · for iron Olympic plates

    The four casters and two bar sockets share a 29 × 23.75 in footprint. XMARK designates this version for iron plates.

  3. 3Amazon (paid link)

    #3Low bumper-plate stand

    Illustration

    Empty stand

    31.1 × 26.4 × 31 in

    Assembled empty stand on fixed feet

    LIONSCOOL

    Olympic Weight Plate Tree

    31 in · fixed feet · two bar holders

    The fixed-foot model stands 31 in high when empty and has six posts for Olympic plates or bumpers.

The Marcy takes the least floor space of these three when empty. The XMARK gives iron plates six horizontal posts and a top post. The fixed-foot LIONSCOOL model has six 11.2-inch posts for Olympic plates or bumpers. It stands 31 inches high empty, with a 31.1 × 26.4-inch base. All three stands have two vertical Olympic bar sockets.

Compare three empty stands

As an Amazon Associate I earn from qualifying purchases. It doesn’t change our picks or your price. Affiliate disclosure

Plate and bar storage comparison
ModelEmpty stand, D × W × HPlate storageVertical bar socketsLoaded dimensionsSource
LIONSCOOL Olympic Weight Plate Tree31 in · fixed feet · two bar holdersCheck storage fitLow bumper-plate standCheck price on Amazon31.1 × 26.4 × 31 in / 79 × 67.1 × 78.8 cmSix 11.2 in usable Olympic posts · 1,000 lb rated2The 31 in selection uses foot pads. LIONSCOOL lists 31.1 × 26.4 × 31 in for this configuration. Enter your own measurements with plates and bars loaded.LIONSCOOL dimensions by foot or wheel configuration (paid link)Manufacturer-reported ·
Marcy Olympic Plate Tree PT-5856Six pegs · wheeledCheck storage fitSmallest baseCheck price on Amazon23.75 × 23.5 × 53 in / 60.4 × 59.7 × 134.7 cmSix Olympic plate posts · 300 lb rated2Loaded size varies with plate diameter, placement and the longest bar. The published dimensions describe the empty stand.Marcy PT-5856 assembled measurementsManufacturer-reported ·
XMARK Commercial Olympic Plate TreeXM-9055 · for iron Olympic platesCheck storage fitRolling iron-plate storageCheck price on Amazon29 × 23.75 × 57 in / 73.7 × 60.4 × 144.8 cmSix 9.5 in horizontal posts and one 7 in top post for iron plates · 750 lb rated2Loaded size varies with plate diameter, placement and the longest bar. The published dimensions describe the empty stand.XMARK rack and plate specificationsManufacturer-reported · XMARK dimension drawing

Measure with plates and bars in place

  1. Mark the empty stand’s depth and width on the floor, including any casters.
  2. With your intended plate layout, measure the outermost edges on both axes, including any base or peg that extends beyond a plate. Diameter and post position both affect this measurement.
  3. Measure floor to the highest loaded point, including any bar. Separately check the height needed to lift the bar clear of its socket. That extra removal space is specific to your bar and holder.

For example, a 24 × 24 in alcove contains Marcy’s 23.75 × 23.5 in empty footprint. That tells you nothing yet about clearance past a shelf when you lift a bar out. In the stand size finder, select your loaded model and enter your measured dimensions to check the complete setup. A missing loaded size stays unknown.

Use the plate comparison to check the diameter and thickness of the plates that will live on the stand.

Check your storage space

Related guides