COMPARISON
Olympic plate sets and collars for short sleeves
For a short Olympic sleeve, a 45 lb CAP Elite iron grip plate takes up 1.3 inches per side when you load one plate on each end. Reserve separate space for the collars. CAP Elite 45 lb grip plate on Amazon (paid link)
A 45 lb CAP speckled bumper takes up 2.6 inches. One each of the five bumper sizes uses 8.08 inches on a single sleeve before the collar. CAP plate diameter and thickness drawing
EDITOR’S PICKS
Our top picks
Compare the size, setup, and limitations of each pick. Follow “Specs & sources” for the measurements behind it.
As an Amazon Associate I earn from qualifying purchases. It doesn’t change our picks or your price. Affiliate disclosure
#1Five matched bumper pairs
IllustrationSleeve fit
2 in Olympic
Plates only. Supply two collars.
CAP Barbell
Economy Speckled Bumper Plate Set
OSR9IS-260 · 260 lb · ten Olympic plates
One plate of each weight takes up 8.08 in per side before the collar. Compare that stack with the sleeves on your bar.
Paid link
#2Bar and clips included
IllustrationSleeve fit
2 in Olympic
Two spring clips pictured in the selected package.
Signature Fitness
Olympic Cast Iron Set
300 lb · 7 ft bar · 2INCHSTD300BARCLIPS
The 300 lb total comprises 255 lb of plates and a 45 lb bar. The selected package also shows two spring clips.
Paid link
#3Collars for an existing set
IllustrationSleeve fit
2 in / 50 mm Olympic
One locking collar per end. Plates sold separately.
Lock-Jaw
PRO 2 Collars
Olympic · pair
A lever-operated pair for Olympic sleeves. Reserve space at both ends of the bar for the collars after loading the plates.
Paid link
The Signature Fitness 300 lb kit includes a bar, 14 plates and two spring clips. CAP’s 260 lb bumper set contains five pairs of plates. Its 45 lb Elite grip plate is sold singly. Lock-Jaw supplies two collars for an existing bar.
Compare the four options
As an Amazon Associate I earn from qualifying purchases. It doesn’t change our picks or your price. Affiliate disclosure
| Model | In the box | Sleeve fit | Space on sleeve | Closures | Source |
|---|---|---|---|---|---|
| CAP Barbell Elite Olympic Grip PlateOPHWIS-045 · 45 lb singleCheck storage fitThin 45 lb plateCheck price on Amazon (paid link) | One 45 lb cast-iron grip plate, 17.1 in across. | 2 in Olympic | 1.3 in (3.30 cm) for one 45 lb plate. | Plate only. Supply a collar for each end. | CAP Elite 45 lb grip plate on Amazon (paid link)Manufacturer-reported · CAP 45 lb diameter and thickness drawing (paid link) |
| CAP Barbell Economy Speckled Bumper Plate SetOSR9IS-260 · 260 lb · ten Olympic platesCheck storage fitFive matched bumper pairsCheck price on Amazon (paid link) | Two each at 10, 15, 25, 35 and 45 lb. Total plate weight 260 lb. | 2 in Olympic | 10 lb × 0.78 in, 15 lb × 1 in, 25 lb × 1.6 in, 35 lb × 2.1 in and 45 lb × 2.6 in. | Plates only. Supply two collars. | CAP 260 lb set inventoryManufacturer-reported · CAP plate diameter and thickness drawing |
| Lock-Jaw PRO 2 CollarsOlympic · pairCheck storage fitCollars for an existing setCheck price on Amazon (paid link) | Two lever-lock collars. | 2 in / 50 mm Olympic | Measure the part of each collar that sits along the sleeve. | One locking collar per end. Plates sold separately. | Lock-Jaw PRO specifications and Amazon listingManufacturer-reported · |
| Signature Fitness Olympic Cast Iron Set300 lb · 7 ft bar · 2INCHSTD300BARCLIPSCheck storage fitBar and clips includedCheck price on Amazon (paid link) | One 7 ft, 45 lb bar. Two each at 2.5, 10, 25, 35 and 45 lb, plus four 5 lb plates. | 2 in Olympic | The listing does not give thickness per plate for this kit. | Two spring clips pictured in the selected package. | Signature Fitness set contents and model on Amazon (paid link)Manufacturer-reported · Signature Fitness kit contents photo (paid link) |
Work out how much of the sleeve you will use
Add the thickness of each plate on one side. One of each weight from the CAP bumper set totals 130 lb and takes up 8.08 in. Titan’s 9.75 in technique-bar sleeve would have 1.67 in left for a collar. The same stack exceeds the roughly 7.9 in sleeves on the Bells of Steel bar before you add a collar. At 45 lb, CAP’s Elite iron plate uses 1.3 in of sleeve per plate. The 45 lb speckled bumper in the set uses 2.6 in. CAP bumper dimensions and CAP Elite grip-plate drawing (paid link).
Check the usable sleeve length and the axial width of the collar with its lever closed. Match both the plate bore and collar to the sleeve size. A kit’s advertised weight can include its bar. The Signature Fitness kit gives you 255 lb of plates and a 45 lb bar.
Find a place for the plates
The Olympic plates in these three listings can also load a rack pulley. Check the kit’s plate attachment and your available lifting height. Rack pulley and plate compatibility.
Use the diameter of the largest plate to plan a storage post, and leave a path to take it off. The finder identifies when a dimension covers a single plate. Compare plate and bar stands or check the available storage space.