COMPARISON
Which pull-up bars fit your doorway?
For a 34-inch clear opening that you can drill into, the straight ProsourceFit Doorway bar fits jambs 25–39 inches apart and uses screw-mounted holders. ProsourceFit specifications
For a trim-mounted option, the Ultimate Body Press XL spans openings 24–36 inches wide. Check frame depth and trim before choosing it. Ultimate Body Press specifications
The Multi-Grip Lite fits narrower openings, from 24 to 32 inches wide. ProsourceFit specifications
EDITOR’S PICKS
Our top picks
Compare the size, setup, and limitations of each pick. Follow “Specs & sources” for the measurements behind it.
As an Amazon Associate I earn from qualifying purchases. It doesn’t change our picks or your price. Affiliate disclosure
#1Best overall
IllustrationStored size
12 × 36.75 × 9 in
Assembled, crossbar across the shelf
ProsourceFit
Multi-Grip Lite
ps-1240-cu-basic
A leverage bar with multiple grips that rests assembled on a shelf.
- Several grip positions
- 36.75 inches wide when stored assembled
- Needs 4.75–6 in frame depth
- Fits openings of 24–32 in
Paid link
#2Widest doorway range
IllustrationDoor opening
25–39 in
Clear width between the jambs
ProsourceFit
Doorway Pull-Up Bar
Adjustable rod · ps-1110-cu-lite
An adjustable rod for clear openings from 25 to 39 inches.
- Fits openings up to 39 in
- Mounts inside the jambs
- Needs holders fixed to the jambs
- Storage size is not published
Paid link
#3Elevated bar
IllustrationDoor opening
24–36 in
Clear width between the jambs
Ultimate Body Press
XL Doorway Pull Up Bar
Elevated bar · PLB-XL
A leverage bar with a raised crossbar for openings of 24 to 36 inches.
- Raised bar position
- Fits openings of 24–36 in
- Listed for a 6 in frame depth only
Paid link
At 34 inches wide, a doorway is beyond the Multi-Grip Lite’s range. Two of these bars still qualify on width. The Ultimate Body Press XL rests on the trim and gives you an elevated grip. The straight ProsourceFit bar sits between the jambs and requires screw-mounted holders on both sides. Whether you can drill into the frame makes a difference even when the tape measure gives the same reading.
As an Amazon Associate I earn from qualifying purchases. It doesn’t change our picks or your price. Affiliate disclosure
| Model | Clear opening width | Frame requirements | Mounting | Source |
|---|---|---|---|---|
| ProsourceFit Doorway Pull-Up BarAdjustable rod · ps-1110-cu-liteCheck storage fitWidest doorway rangeCheck price on Amazon (paid link) | 25–39 in (63.5–99.06 cm) | The two jamb faces must accept the supplied metal holders. | Inside the opening. Screw a holder into each side and extend the bar into them. | ProsourceFit specificationsManufacturer-reported · Installation manual (PDF) |
| ProsourceFit Multi-Grip Liteps-1240-cu-basicCheck storage fitBest overallCheck price on Amazon (paid link) | 24–32 in (60.96–81.28 cm) | Frame depth 4.75–6 in (12.065–15.24 cm) using the common range of the specs and manual. Molding face up to 3.5 in (8.89 cm). | Hooks over the trim. The manual shows the supplied security bracket. | ProsourceFit specificationsManufacturer-reported · Installation manual (PDF) |
| Ultimate Body Press XL Doorway Pull Up BarElevated bar · PLB-XLCheck storage fitElevated barCheck price on Amazon (paid link) | 24–36 in (60.96–91.44 cm) | The Amazon listing specifies 6 in (15.24 cm) from trim face to trim face. Confirm other depths. Molding face up to 3.5 in (8.89 cm). | Leverages the doorway trim. Extend the bar ends to suit the opening. | Ultimate Body Press specificationsManufacturer-reported · Installation manual (PDF) |
Measure the opening and the trim
Open the door and measure straight across between the jambs where the bar will sit. A door sold as a nominal 32-inch slab can give you a different figure from the clear opening. For a leverage bar, measure the frame depth from front to back and the width across the face of the molding. Check that the contact points shown in the installation manual are present and sound.
Three details affect the limits in the table and the doorway size checker.
-
Multi-Grip Lite. The manual gives a frame depth of 4.75–6.25 inches. The product page sets a 6-inch maximum. We use their overlap, 4.75–6 inches. For a frame in the disputed quarter-inch, confirm the limit with ProsourceFit for your model.
-
ProsourceFit Doorway. The adjustable rod extends from 24 inches, but the manufacturer specifies door openings starting at 25 inches. Use 25 inches as the minimum when measuring your jambs.
-
Ultimate Body Press XL. The U.S. listing specifies a 6-inch depth from trim face to trim face. It gives no tolerance around that measurement. For another depth, the checker flags it for confirmation. Amazon listing for the PLB-XL (paid link).
After the workout
The Multi-Grip Lite can go on a shelf fully assembled. Allow 36.75 inches across, 12 inches front to back, and 9 inches high before adding handling clearance. For the straight ProsourceFit and the Ultimate Body Press XL, the available specifications do not give a verified three-dimensional storage size. The Storage Fit Finder shows those two as unknown for storage while still checking their doorway dimensions.